Submerged Aluminum Pneumatic Pulse Valve 1 inch Air Clean DMF-Y-25

Submerged Aluminum Pneumatic Pulse Valve 1 inch Air Clean DMF-Y-25

High purity aluminum alloy die-cast valve body, using the top butene rubber diaphragm, so that the diaphragm has a very high tensile strength, aging resistance and low wear, so that the electromagnetic pulse valve injection life is more than 1 million times or three to five years of use without damage

Electromagnetic pulse valve is higher than the national standard level insulation coil used by the protection grade reaches IP65 whole potting, full of copper enameled wire, coil number higher than the national standard, to ensure the electromagnetic pulse valve electricity and no damage to 6 million times, the electromagnetic coil can rotate 360 ° in the pulse valve core, junction box can be installed in a 4 x 90 ° rotation, can prevent the exposed to rain water into the open, greatly convenient to install a different point of view.

Working Pressure:0.1~0.8MPa

Working medium:Air

Voltage:DC24V,AC110V,AC220V

Current:1A,0.46A,0.23A

Working Temperature:-25~80℃

Relative humidity:≤85%

Weight:0.75Kg

Material Construction:

Dimensional drawing:

The electromagnetic pulse valve is the "switch" of compressed air in the dust removal and injection system of the pulse bag filter. Controlled by the output signal of the pulse jet control instrument, the filter bag is sprayed to clear the dust one by one row to keep the resistance of the dust collector within the set range to ensure the processing capacity and dust collection efficiency of the dust collector.

Dmf-y-type electromagnetic pulse valve is a submerged valve, which is directly installed on the air bag and has better circulation characteristics. Pressure loss decreased, suitable for low pressure air source working conditions:

1.Electromagnetic pulse valve (also known as diaphragm valve) is the "switch" of compressed air in the dust removal and injection system of pulse bag filter.

Controlled by the output signal of the pulse jet control instrument, the filter bag is sprayed and cleaned one by one (chamber) to keep the resistance of the dust collector within the set range, so as to ensure the processing capacity and dust collection efficiency of the dust collector.

2.Working principle the electromagnetic pulse valve is in accordance with electrical signals to control the opening and closing of the valve body unloading hole, the valve body unloading, the pressure in the back chamber of the valve gas emissions, the pressure in the front chamber of the valve by the diaphragm pressure hole throttle, diaphragm is lifted, the pulse valve for injection

When the valve body stops unloading, the pressure gas quickly fills the back chamber of the valve through the damping hole. Due to the difference in the stressed area between the two sides of the diaphragm on the valve body, the force of the gas in the back chamber of the valve is large, the diaphragm can reliably close the nozzle of the shutoff valve, and the pulse valve stops spraying.

solenoid pulse valve

pulse solenoid valve

Submerged Aluminum Pneumatic Pulse Valve 1 inch Air Clean DMF-Y-25 Images